Published by If you or someone you know suffered a serious laceration or injury due to the malfunction of a Hyper Tough electric corded chainsaw or pole saw, you may qualify to file a Hyper Tough Chainsaw Lawsuit. These claims address risks stemming from a design flaw that allows the blade to remain engaged even after the trigger is released.
At Schmidt & Clark, LLP, our product liability attorneys have deep experience representing clients harmed by dangerous power tool defects. We are committed to holding manufacturers and distributors accountable and helping victims recover the compensation they deserve for medical bills, lost wages, pain and suffering, and other damages.
Contact Schmidt & Clark today for a free, no‑obligation consultation.
Click the button below for a Free Confidential Case Evaluation or call us toll‑free 24/7 at (866) 588‑0600.
Table Of Contents
Hyper Tough Chainsaw Recall Lawsuit Overview
This lawsuit stems from a July 3, 2025 recall by the U.S. Consumer Product Safety Commission (CPSC) involving approximately 49,000 electric corded chainsaws and pole saws sold under the Hyper Tough (Walmart), Worx, and Portland (Harbor Freight) brands.
The chainsaws’ main power switch can fail—causing the blade to continue spinning even after the user releases the trigger—creating a serious laceration hazard. Although no injuries have yet been reported, the failure poses a significant legal issue under product liability and consumer protection laws.
Latest Lawsuit Updates
- July 3, 2025 – CPSC announces recall after confirming switch failures allowing saws to run when released [1.].
- July 4, 2025 – Media outlets (Fox Business, RTTNews) report widespread recall, urging users to stop use immediately and seek free replacement [2.].
Chainsaw Lawsuit Statistics
- Units recalled: ~49,000 electric chainsaws and pole saws.
- Reported injuries: None currently reported, but the hazard remains significant.
- Sales period: September 2024–March 2025 across Walmart (Hyper Tough), Harbor Freight (Portland), Worx.com, Amazon, and mainstream retail outlets.
Design Flaw & Hazard Analysis
The root issue stems from a defective main power switch that can fail to disengage the motor when the trigger is released. This dangerous condition can result in the spinning blade unexpectedly contacting the user or bystanders, breaching fair warning duties and design safety obligations. The defect likely supports claims based on strict liability, negligence, breach of warranty, and failure to warn.
Injuries & Side Effects
Using a chainsaw with this defect may lead to serious harm, including:
- Lacerations and deep cuts: Contact with a running blade can result in severe wounds.
- Eye and facial trauma: Flying debris or involuntary hand movement can cause ocular injuries.
- Psychological trauma: Panic or fear following involuntary activation can cause lasting mental stress.
Do You Qualify?
You may qualify for compensation if you:
- Owned or used a recalled Hyper Tough, Worx, or Portland electric corded chainsaw/pole saw between September 2024 and March 2025.
- Suffered a laceration, near miss, psychological trauma, or property damage due to unexpected blade operation.
- Can show proof of purchase, photographs of the product, or evidence of the defect.
- Ceased use following the recall or experienced the malfunction as outlined.
Evidence Required
- Product evidence: Photos of the saw’s body, UPC, serial number, and model identification.
- Proof of purchase: Receipts, order confirmations, store logs.
- Medical records: Hospital bills, ER reports, injury photos.
- Incident documentation: Witness statements, accident reports, tool inspection results.
- Recall proof: CPSC or manufacturer recall emails, website notices.
Damages You Can Recover
- Medical expenses: Emergency care, wound treatment, specialists.
- Pain & suffering: Both physical pain and emotional distress.
- Lost wages: Income lost due to injury recovery.
- Property repair: Costs for damaged workspaces, tools, equipment.
- Punitive damages: Potential when the manufacturer knowingly ignored known hazards.
Recall Instructions & Consumer Guidance
- Recall date: July 3, 2025 — CPSC recall issued.
- Products recalled: Hyper Tough 9‑Amp 14″ chainsaw, Worx 8‑Amp 14″ chainsaw, Worx 8‑Amp pole saw, Portland 9‑Amp 14″ chainsaw.
- Hazard: Switch failure allowing continued blade operation after trigger release.
- Consumer remedy: Stop use immediately and contact Positec for a prepaid shipping label and free replacement.
Statute of Limitations & Urgency
Legal claims for personal injury due to product defects must typically be filed within two to five years of the incident or recall, depending on the state. Acting quickly preserves critical evidence—such as the defective saw, medical records, and purchase documentation—and strengthens your claim.
Related Articles:
- Harbor Freight Power Station Recall Lawsuit
- Portland Chainsaw Recall Lawsuit
- Worx Chainsaw Recall Lawsuit
Frequently Asked Questions
- Do I need to keep the saw? Yes—having the actual unit or clear photos of the defect supports your claim.
- Can I sue if I was only frightened? Yes—psychological harm from a dangerous malfunction may still merit compensation.
- Is warranty coverage enough? No—recall repairs or replacements do not eliminate legal remedies for injury.
- Do I need a lawyer? Yes—product liability claims involve technical and legal complexities that warrant expert representation.
References
- https://www.cpsc.gov/Recalls/2025/Positec-Recalls-Electric-Corded-Chainsaws-and-Pole-Saws-Due-to-Laceration-Hazard
- https://www.foxbusiness.com/lifestyle/about-49000-electric-chainsaws-pole-saws-recalled-switch-failure-laceration-hazard
- https://www.rttnews.com/3550900/positec-recalls-about-49k-electric-corded-chainsaws-and-pole-saws.aspx