Published by If you purchased a recalled VEVOR Garment Steamer and suffered burns or other harm after hot water leaked, spit, or the water tank cap detached, you may be entitled to compensation through a Vevor Steamer Recall Lawsuit.
Our legal team offers a free, no-obligation consultation and accepts representation on a contingency-fee basis.
Table Of Contents
What’s the Problem?
On December 11, 2025, the U.S. Consumer Product Safety Commission (CPSC) announced a recall of about 2,840 VEVOR Garment Steamers because the steamers can leak or spit hot water, posing a risk of serious burn injury to users and bystanders.
CPSC also states the water tank cap can leak or detach during use, exposing users to hot water. The recall remedy is a refund, and consumers are instructed to immediately stop using the recalled steamers and contact Sanven Technology for a full refund.
Latest Updates
- December 11, 2025 – CPSC issued Recall No. 26-142 for VEVOR Garment Steamers due to reports that the units can leak or spit hot water and that water tank caps can leak or detach, creating a burn hazard. [1]
Product & Usage Overview
This recall involves VEVOR Garment Steamers used to remove wrinkles from clothing and textiles. CPSC describes the recalled steamer as having an oval-shaped opening for the steam vents and a white steamer body with “VEVOR” and “TOUGH TOOLS, HALF PRICE” printed in orange lettering on the side of the product beneath the water reservoir window. There is a red toggle power switch on the handle. The recalled steamer was sold with a silver-colored glove.
CPSC also notes identifying information printed on a label on the bottom of the steamer, including “VEVOR,” “Garment Steamer,” “FCL-H09,” and “Manufacturer: Guangdong ESINO Technology Group Co., Ltd.” If your unit matches this description and labeling, it may be included in the recall.
According to CPSC, the steamers were sold online at Vevor.com, Amazon.com, and HomeDepot.com from December 2023 through September 2025 for between about 10 and 33 dollars. The distributor is Sanven Technology Ltd., doing business as VEVOR, of Rancho Cucamonga, California, and the steamers were manufactured in China.
Injuries & Incident Reports
CPSC states the firm received six reports of hot water spitting, pouring out, leaking, or dripping from the steamers. CPSC also reports 12 reports involving the water tank cap detaching, leaking, not staying closed, fitting loosely, or melting.
For injuries, CPSC reports that the cap issues resulted in two burn injuries, including one consumer who received a permanent scar and a second-degree burn after the steamer’s cap suddenly detached, and another consumer who received a minor burn on their hand and fingers from leaked water. CPSC also notes one report of a minor steam burn through the provided glove.
Do You Qualify for a Vevor Steamer Recall Lawsuit?
You may qualify to pursue a Vevor Steamer Recall Lawsuit if one or more of the following applies to your situation:
- You purchased a VEVOR Garment Steamer sold online at Vevor.com, Amazon.com, or HomeDepot.com between December 2023 and September 2025.
- Your unit matches the recalled product description and bottom label identifiers, including “FCL-H09” and the manufacturer name listed in the recall notice.
- The steamer leaked, spit, poured, or dripped hot water during use, or the water tank cap detached, leaked, or failed to stay closed.
- You suffered a burn injury (or another compensable harm) associated with the steamer’s hot water leakage, spitting, or cap detachment.
- You incurred out-of-pocket losses tied to the incident, such as medical bills, lost time from work, or replacement costs.
Evidence You Should Gather
If you are considering legal action, documentation can be critical. Useful evidence may include:
- Order confirmation, receipt, or account history showing the retailer and purchase date (Vevor.com, Amazon.com, or HomeDepot.com).
- Photos of the steamer showing the exterior markings and the bottom label with “FCL-H09” and the listed manufacturer name.
- Photos or video of leaking/spitting hot water or any cap defect, if safely obtainable.
- Medical records and bills for treatment of burns (including documentation of severity and scarring, if applicable).
- Copies of communications with Sanven Technology regarding the recall and refund process (including your refund submission photo and reply).
Damages You May Be Able to Recover
Depending on the facts, a Vevor Steamer Recall Lawsuit may seek compensation for:
- Medical expenses (emergency care, follow-up visits, wound care, and related treatment for burns).
- Lost income if injuries caused missed work or reduced capacity.
- Pain and suffering and emotional distress associated with a burn event, including scarring where applicable.
- Out-of-pocket costs related to the recalled product and incident-related expenses.
Legal Theories & Liability Grounds
Burn-hazard cases involving recalled consumer appliances are commonly evaluated under product liability and negligence frameworks. Based on the recall’s stated hazard mechanism and reported injuries, potential legal theories may include:
- Defective design or manufacture: Allegations that the steamer’s hot-water containment, venting, or cap design allowed hot water to leak/spit or the cap to detach during normal use.
- Strict product liability: Claims that the product was unreasonably dangerous when it entered the marketplace due to the burn hazard described in the recall notice.
- Failure to warn: Claims that consumers were not adequately warned about the risk of hot water leakage/spitting and cap detachment before incidents occurred.
Statute of Limitations & Timing
Every state imposes deadlines for filing injury and product liability claims, known as statutes of limitations. These deadlines vary and can depend on the date of injury and other legal factors. Because the recall remedy requires consumers to disable the steamer by cutting the unplugged power cord and providing a photo to obtain a refund, it is important to document the product thoroughly before altering it and to keep copies of all recall-related submissions.
Frequently Asked Questions
- What should I do if I still have a recalled VEVOR Garment Steamer?
CPSC instructs consumers to immediately stop using the recalled steamers and contact Sanven Technology for a full refund. Consumers will be asked to provide their contact information and send a photo of the steamer with its unplugged cut power cord to receive the refund. - How do I contact the company for recall instructions?
CPSC lists Sanven Technology contact options: toll-free 855-599-6320 (9 a.m. to 5 p.m. PT Monday through Friday), email recalling@vevor.com, or online at vevor.com/pages/vevor-steamer-recall, or at www.vevor.com by clicking “Product Recall” at the top of the page. - What types of problems were reported?
CPSC reports hot water spitting/pouring/leaking/dripping and multiple issues with the water tank cap, including detaching, leaking, not staying closed, fitting loosely, or melting, with burn injuries reported in the recall notice.
Why You Should Act Now
When a garment steamer can release hot water unexpectedly or the water tank cap can detach, burn injuries can occur quickly and without warning. If you own one of the recalled VEVOR Garment Steamers, stop using it immediately and follow the refund instructions. If you suffered burns or other losses tied to hot water leakage, spitting, or cap detachment, a product liability attorney can evaluate whether a Vevor Steamer Recall Lawsuit is appropriate and help preserve the evidence needed to support your claim.
References
- https://www.cpsc.gov/Recalls/2026/Sanven-Technology-Recalls-VEVOR-Steamers-Due-to-Risk-of-Serious-Injury-from-Burn-Hazard