Evenflo® Envision and Majestic High Chair Recall Lawsuit

Evenflo in association with the U.S. Consumer Product Safety Commission (CPSC) has issued two (2) high chair recalls involving both the Envision and Majestic models due to reports of fall and choking hazards or injuries.

If your child has been injured by a defective Evenflo high chair, you should contact us immediately. You may be entitled to compensation for your injuries and we can help.

About the Evenflo Envision High Chair Recall

On April 2, 2009 Evenflo initiated a nationwide recall of approximately 643,000 Envision high chairs. The manufacturer has stated that the recline fasteners and metal screws on both sides of the high chair can loosen and fall out, allowing the seatback to detach or recline unexpectedly. Children can fall backwards or fall out of the high chair and suffer bumps and bruises to the head, abrasions, cuts and bruises. Detached hardware also poses a choking hazard to children.

Evenflo has received 320 reports of seatbacks detaching or reclining unexpectedly, resulting in 19 reports of bumps and bruises to the head and 35 reports of other injuries including abrasions, pinches and bruises. Evenflo has also received 13 reports of recline fasteners and screws falling out of the high chair, resulting in one incident in which a fastener and/or screws were found in a child’s hand or mouth but were removed before choking occurred.

The recall involves all Evenflo Envision high chairs, including model numbers: 2891321, 2891321A, 2891333, 2891351, 2891351A, 2891365, 2891375, 2891403, 2891403A, 2891466, 2891466A, 2891478, 2891536, 2891536A, 2891573, 2891586, 2892351 and 2892351A. The model number can be found on a white label on the seatback. “Evenflo” and “Envision” are printed on the front of the tray.

About the Evenflo Majestic High Chair Recall

On December 18, 2009 Evenflo initiated a nationwide recall of approximately 95,000 Majestic high chairs. The manufacturer has stated that the plastic caps and metal screws on both sides of the high chair can loosen and fall out, posing both fall and choking hazards to children. Plastic caps and screws that become loose and fall out can cause the seatback to suddenly fall back or detach from the high chair. Children can fall out or collide with objects and suffer broken bones, abrasions, cuts and bruises. Detached plastic caps and metal screws also pose a choking hazard to children.

Evenflo has received 140 reports of seatbacks reclining, falling back and/or detaching unexpectedly, which resulted in at least 47 reports of bumps and bruises to the head, two reports of broken bones, and at least 45 reports of other injuries including abrasions, cuts, and bruises. Evenflo has received more than 1,000 reports of plastic caps and screws falling out of the high chairs, including seven incidents in which caps and screws were found in children’s hands or mouths but were removed before choking occurred.

The recall involves Evenflo Majestic™ high chairs made before January 23, 2007. The recalled high chairs have the following model numbers: 3001395A, 3001583, 3001633A, 3001669, 3001700A, 3001713, 3001713A, 3001730A, 3001732, 3001732A, 3001733, 3001742, 3001742A, and 3001756. The model number and production date can be found on a white label on the seatback. “Evenflo” is printed on the label and on the push button on the front of the tray.

Do I Have an Evenflo High Chair Recall Lawsuit?

The Products Liability & Personal Injury Litigation Group at our law firm is an experienced team of trial lawyers that focus exclusively on the representation of plaintiffs in high chair recall lawsuits.

Again, if your child has been injured by a defective Evenflo high chair, you should contact us immediately. You may be entitled to compensation for your injuries and we can help.